The large-format tabletop filler. It runs double the bottles of the 12x12 every cycle and still fits on a bench.
Double the bottles of the 12x12 on every cycle.
Peristaltic, HighLo, syringe and micro dosing pumps, matched to your product.
Start with one filling head and add up to six as your volume grows.
The software grows with you. A few simple variables set the tray, the fill and the speed.
Product only touches the holding tank, tubing and nozzle. Change the tubing and nozzle for a full line clear.
Fill hot or cold products. Tubing is rated for over 200°F.
The 12x29 is the same Matrix machine with a longer bed. One operator loads a tray, presses start and caps the last tray while this one fills.
More bottles per tray means fewer tray changes, which is where the output comes from. Add pump heads and the machine fills several bottles at every stop.
It is well suited to bottles of 16 oz and under, and it uses the same pumps, tubing and software as the 12x12, so a second machine needs no retraining.




More on the videos and tutorials page.
“Yes, the new pump is flat-out amazing! I did some validation work after we spoke and I calculated that on a 1mL fill volume I was getting less than ½ of 1% variation over a span of 27 bottles. Just awesome!!”
“I’m 140,000 units into production and very happy w/ everything. Appreciate ya and look forward to coming back again soon for more of your work.”
“Things are going well for us, and I’m interested in getting another paint filler robot / machine from you... the 12" x 29" Matrix Bottle Filler this time.”
The 12x29 Matrix starts at $9,980 with one pump and nozzle. Each extra pump head is $1,900, and 12x29 bottle trays are $325 each.
The filling area is 12 x 29 inches instead of 12 x 12, so it runs double the bottles every cycle. The pumps, software and controls are the same.
You can add up to six filling heads and nozzles.
The footprint is 43 x 20 inches or 48 x 20 inches depending on configuration.
We'll tell you which Matrix filler fits and what it costs.